Product Benefits
Energy and cost savings
TEL’s kitchen control system controls the amount of ventilation required in the kitchen depending on cooking loads, considerably reducing energy costs and carbon emissions.
Noise reduction
TEL’s kitchen control system reduces the need to run fans at full speed all of the time, virtually eliminating kitchen noise levels and creating a pleasant environment for employees and guests (when located next to guest rooms).
Extending equipment life
TEL’s kitchen control system can extend the life of your kitchen equipment – including the belt life; filter life and reducing compressor run time.
Reducing cleaning costs
Excessive fan speeds send grease up the duct, into the fan and out to the building roof. Slowing down the exhaust fans and reducing the air duct velocity allows the grease to drain back to the hood and into grease cups for easy disposal. This reduces the frequency that the hood and ducts need to be cleaned.
Choosing the right model
4NM Fumecupboard Actuator
Modulating damper actuator for adjusting dampers in technical building installations.
6NM SuperCap Actuator
Modulating SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories.
AFA1000/AHU
The AFA1000/AHU model is a wall mounted pressure controller suitable for controlling the duct pressure of an AHU using an inverter drive.
AFA1000/BLD
The AFA1000/BLD is a wall mounted fresh air bleed controller suitable for controlling the VAV system duct pressure using a fresh air bleed damper or fan inverter drive.
AFA1000/E
The AFA1000/E is a digital airflow VAV controller available with a range of remote unique airflow sensors that are used to measure face velocities or duct velocities. The AFA1000/E is available fully flush (MK2) or semi flush (MK3).
AFA1000/E Dual Output
The AFA1000/E has a dual output allowing control of a secondary function such as Supply Air damper/inverter control or Fresh Air bleed damper control.
AFA1000/RM
The AFA1000/RM model is a wall mounted room differential pressure controller suitable for controlling the supply air into a room using a damper, valve or inverter.
AFA3000/E
The AFA3000 VAV controller has been specifically designed for Venturi Valve fume cupboard applications.
The controller will adjust the valve to the desired flow based on sash position. The mechanically pressure independent valve will accurately control and maintain design flows (as the system pressure/sash position changes). As the valve cannot detect changes in the face velocity of the fume cupboard , we incorporate one of our velocity sensors that will increase the flow of the valve if the face velocity drops below desired values.
AFA4000/E
The AFA4000/E is a pioneering airflow controlling system developed to ensure the safety of users, working with industrial and educational fume cupboards and biological safety cabinets.
ECON Damper
A precision engineered single blade butterfly damper designed for many years of maintenance free movement. The clear bodied design allows you to check for any debris caught on the internal blade.
